🔌 Type-C Plug & Play – No App Needed Directly connect the receiver to your Android phone via Type-C port No battery inside the receiver – works directly with phone power Can be used while charging your phone through the Type-C pass-through port 📦 What’s in the Box 🎙️ 1x Microphone Transmitter 📥 1x Type-C Receiver 🔋 1x Charging Case 🔌 1x Charging Cable 📖 1x User Manual ⚙️ Technical Specifications Frequency: 2.4GHz Response Range: 20Hz – 20KHz Charging Time: ~80 minutes Working Time: ~6 hours Weight: ~70g Battery: 🎙️ Microphone: 60mAh 🔋 Charging Case: 600mAh Receiver Charging Interface: Type-C 🔧 How to Use Step 1: Plug the Type-C receiver into your Android phone. Step 2: Press the switch key on the microphone until the green light appears. Step 3: Once the red light on the receiver stays on, open your Camera or recording app and start using the mic. 🔋 If your phone battery is low during live use, you can charge it directly through the receiver’s Type-C pass-through port. 🔴 LED Indicator Guide Microphone Transmitter Power On: Hold button 3 seconds → LED flashes red & green Power Off: Hold button 3 seconds → LED turns off Not Paired: LED flashes red & green Connected: Green on, red off (alternating) Noise Reduction: Green light on Reverb Mode: Triple click → Red blinks once, then green stays on Mute Mic: Double click → Green flashes, red off Charging: Red light on, green off Fully Charged: All lights off Low Battery: Red light flashes every 10 sec Type-C Receiver Power On (plug in): Blinking red light Connected: Solid red light Unpaired: Blinking red light Power Off (unplug): Light off